I have had difficulties getting online with 3G USB modems under Mac OS X 10.5. Using the guides of my Internet Service Provider or modem manufacturer did not help and I kept being offline all the time.The solution was to use GPRS settings presented on the Ross Barkman´s www-site. I picked there Access Point Name, user name, password and DNS server for my ISP and filled them to Mac networks settings and to the connection application (Globetrotter Connect) of the manufacturer (Option, iCon 225 modem).After having found that info, I have never had problems with 3G modems. In my opinion there was not the specific driver for Leopard in my case (Option iCon 225 3G modem).Perhaps not but that modem is not one of the most popular 3G modems on the market.
This package supports the following driver models:External Fax Modem 56K. Enter to Search. My Profile Logout. CNET News Best Apps Popular Apps. HSPA Modem - driver download software driver-category list So that you can grab the precise driver unit, when you require to manually set it up, it is best advocated to make sure details learned out of the windows device manager, over the internet message boards not to mention within the vendor's website.
By far the most popular modem issued by phone operators and isps is the huwaii E220. This is the modem issued by Vodafone, t-mobile and others and does require a driver.the iCon 225 3G is the modem of choice used by Orange. It is a good sign that this device worked in your case without a driver.If manufacturers used standard protocols in their devices then 3rd party drivers would not be required. For example a recently tested a d-link usb2 to ethernet adapter worked in leopard without a driver. Apple Footer.This site contains user submitted content, comments and opinions and is for informational purposes only. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums.
Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.
The easiest way to go about installing our is by starting with the device. If you want to verify that the adapter and the driver were installed properly clickConnect the device to the Mac. Once connected click on the Apple icon and on ‘About This Mac’Click on ‘More Info’Click on ‘USB’ on the left and on the ‘USB-Serial Controller D’If all is well you should be seeing something like this:Time to get the driver! Hi Sam, we’re glad to hear you found our article helpful!Getting scrolling in screen working is a little different depending on which version of osX you’re running and requires editing screenrc, unfortunately not a single command for this that I know of.Here is the best thread I’ve found on enabling screen scrollback (and more):Here’s another thread from stack overflow that talks about some options to enable scrollback in screen:A lot of people also prefer alternative terminals like Zterm, iTerm 2, etc. Several are mentioned in the stack overflow thread.Hugo. I wonder if anybody knows if there is any issues with the commonly available usb to serial cables that are so commonly purchased unwittingly that are a clone of the official pl2303.Prolific seem to be deliberately isolating compatibility against these devices in the newest Windows drivers, and wondered if thats the same with the mac drivers. Its just not worth wasting time putting in drivers to have to fight them out again when prolific deliberately make them to not work.Bah humbug @ prolific, not fair to cause issues for consumers when they should target the clone chip manufacturers directly!.Jeff Everett.
Hi Denis-Thanks for posting with your question. Indeed we can confirm that on Windows, there is code to check and prevent the Prolific driver from working with a counterfeit chip.As far as we know the check is only built into the Windows driver, we’re not certain if this is the same for OS X. Sorry we can’t provide more info here- I’d try and test on a lab mac but we don’t have any of the counterfeit cables lying around, only ours, the ones we know work 😉If you have one of the counterfeit cables and find that these instructions don’t work, please post back for the benefit of all.Again, thanks for posting with your question.Best wishes-Jeff.Bernie Thompson. Hi Frustrated-The short answer here is that you’ll need to make sure you’re properly terminating any applications or connections using the USB serial device to avoid this issue.We’ve actually seen this across platforms (Windows as well) and are communicating the issue back to Prolific, however in the meantime carefully exiting out of applications and killing processes where needed is your best workaround in the meantime.Here’s a more detailed explanation as to why:Best wishes-Jeff EverettMCITP Enterprise Support TechPlugable Technologies.Alex. After following these directions, and the install of the PL23031.4.0 appearing to be successful, I do not see the USB serial monitor option anywhere. Whether I look on system preferences under network or in terminal.In system preferences/netowrk, when I attempt to add a something, there is no USB option as indicated on this page.In Terminal, all I see is/dev/tty.Bluetooth-Modem/dev/tty.usbmodemfa141/dev/tty.Bluetooth-PDA-SyncI believe the usb/tty.usbmodemfa141 is the Arduino USB driver I previously installed. But I never see a USBserial device or driver.I have an Xbee module and Xbee adaptor connected to the computer via a USB cable.This is on a Macbook Pro running 10.6.8also using CoolTerm I never see the USBserial option, only the USBmodem141 option.thans very much for any help, I’ve been struggling with connecting to these Xbee modules for a few weeks now.Jordan.Jeff Everett.
Hi Jordan (and any others who might be reading this)-One reason our instructions would not work is if you have purchased an FTDI chipset based USB Serial Device. Another common reason for the symptoms you describe would be trying to add the USB Serial Device to network connections when the cable isn’t connected to the system. Hi.I’m trying to use a PL2303 USB-to-Serial cable with my Olimex SAM7-P256 board.I have the Prolific driver installed, and the device is recognized and appears as /dev/cu.usbserialThe board has a standard RS232 port.It seems that no matter what I do, I get ‘gibberish’ characters. You’ve come a long way already. It seems your USB-to-Serial adapter is working.Did you also try removing the interface in the System Preferences?Why would you want to do that?Answer: Because exactly this might conflict with the UPS software.If it still doesn’t work, add it back in, also try configuring the baudrate to 9600 baud.Another thing: Try asking the UPS vendor if the name of the serial port is important.You verify that your USB-to-Serial adapter works by connecting either a modem or another computer via a null-modem cable (eg. A cable where only GND is connected and Rx is connected to Tx and Tx is connected to Rx; that’s all that’s necessary). Then open a terminal window on your Mac OS X machine and type$ cat /dev/cu.usbserialIf you’ve connected another Mac OS X machine with another USB-to-Serial adapter, you can type$ echo “Hello” /dev/cu.usbserialThen the text should appear in the ‘cat’ window.You could also run for a ‘terminal program’ (I think PuTTY will work) on a PC and configure it to 9600 baud, 8N1.Or if you have an easier way, just use that; eg.
If you have an old 9600 baud Hayes modem, it would be fine for such tests.Hmm I actually have an old Hayes modem here, I could go and see if it works with my adapter. =)Also try and look in your manual for the UPS and read what it says about compatibility on the RS232 port. Doom 2019 weapon mods.
The vendor might have the manual available as a PDF download.I just searched the Web and it seems I’ve found their site. Try this page:-There are 3 interesting links:Product Information, Support and Service, “Customer Issues Department” and “Request technical assistance on product(s) already in use”. Perhaps the first one or the last one is most relevant.I’m not sure I can come up with other ideas, but perhaps someone else reading this might have a few suggestions.rj. Thanks so much for all your input. I’ve tried everything. The interface wasn’t in the System Preferences to begin with so I added it and used different configurations, I also assigned the baudrate to 9600 baud, but still won’t detect there is an ‘Auto-search for UPS’ feature in the software of the UPS and this shows up in the terminal:“Broadcast Message from(no tty) at 23:21 ESTUPS Monitoring Software Message: Communication Lost: check connection and portsetting.
”It can’t detect the tty So i guess the UPS doesn’t support the adapter?.Pacman. I think there’s no problem with the UPS hardware. RS232 is RS232; it’s the same all over the World with all devices; fortunately it’s not messed up like most other standards. 😉-But the problem is with the software. Having written software for a PL2303 device myself, I know that there are a few things to do, to write the software properly.One thing.not. to do when writing software, is to use ‘/dev/somename’, because this changes like the weather; different device, different name.There might be one more thing left to try If you right-click on your software application, you’ll see the “Show Package Contents” in the contextual menu. Choose this menu item.
You’ll now see a folder called “Contents”, open it. In this folder, there might be more than one interesting file. You’ll have to do a bit of hunting yourself, but one thing I can suggest, is that you try dragging “Info.plist” onto your TextEdit application and look at the contents. Try and see if you can find a name of a serial port in there.If there’s nothing interesting in that file, try looking inside the “Resources” folder. Files ending in.plist are usually the places where the developer would store such things, which could be tweaked or changed without re-compiling the application.From the terminal, you can also trying CD’ing to the application’s Contents folder and do a$ grep -R -i “serial”.if nothnig found, try “tty” instead of serial. Still nothing?
-try “rs232” or “uart” or “usart”.(Just a thought: I find it a bit weird, if the UPS vendor writes sofware to communicate with the UPS via RS232 and the same vendor does not mention anything at all about compatibility or how to actually connect the UPS in the manual – because why then use several months/years on writing the software? -But I guess some companies want to be strange.).James. Thanks for posting! The USB serial adapter is not working with the current version of OSX 10.11, as you have discovered. El Capitan is still very much in development, and it is normal at this stage for drivers to not work, then start working again as Apple addresses various functions in each new release.
Apple doesn’t give much information to third party developers that allow them to understand the changes Apple is making, and often we can’t know for sure until the final release version is made available shortly before the public release what, if any, driver changes will be needed. If the driver doesn’t work in the final version, we will immediately begin looking for work-arounds while working with the chip maker, Prolific to develop a driver that does work. I’m sorry I can’t be more helpful, but as long as El Capitan is in beta, we won’t be able to guarantee support for it.Jaessr. The enemy is called SIP.
A newly integrated feature which does in fact prevents any unsigned KEXT to be loaded. This means the Profilic driver is shown in the system overview but does in fact have no KEXT loaded to make this thing work.I’ve found a workaround which is kinda annoying and does in fact work only as long as you don’t plug any other USB devices into the port after getting the adapter to work. @MitchellYes it still doeas have the issue with 10.11.1.
I found out that if you leave SIP disabled the whole time you can use it normally with having to do my described steps once. This has been the case here and i thought i had turned it back on which gave the impression as if they’ve had fixed it. Unfortunately you have to stick to my procedure described above but if you leave SIP disabled you can plug in any usb device afterwards it will still work. If you reenable SIP you have to do everthing again, as soon as you plug a different device in. I hope this driver gets signed soon with apple because it is a pain in the a.By the way. This method works with any unsigned driver!!! If you have a non working USB device check the /System/Library/Extensions path for a.kext file with the name of your device.
If you find it there and your device is not working you can be sure its a signature problem. Just use the commands i described above and change the filename of the.kext to the filename you need.This helped me very often to get things going.
Apple should really overthink it signature policy. It’s just annoying 🙁.Charlie. Brutal doom extermination day. Hi Doug,If you have the Plugable adapter, the latest driver for OS X is properly signed and there is no need to turn off SIP in order to install it. If you are having problems getting it installed, please contact us at and we can help.However, reading your previous comment, it looks like SIP isn’t the problem, since SIP will prevent the installation if there is a problem with the driver. More likely there is some configuration issue or connection problem with the Dell switch. A good place to start is to make sure you have the right cable (Null modem or straight) and the correct port settings. If Dell provides a cable, it is usually best to use that one.Doug Lewis.
Hi Richard,Thanks for reaching out to us, I am sorry the software is not correctly detecting the connection to the GPS hardware, there are potentially a large number of issues that can be causing connection problems. We have recently updated our Serial Adapter driver to improve connectivity in macOS ( ), if you are unsure if you have the latest drivers please reach out to our support team directly via email at ‘support@plugable.com’ and we can provide direct support with more details then through this comment system.Thank you,PatPlugable Technology.